Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Brakes/Levers/Pads

$3.50
- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair
$8.75
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$12.00 - $12.99
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
$19.00 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$19.00 - $37.99
Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible
$20.99 - $22.99
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
$24.99 - $62.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$24.99 - $32.95
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$39.99 - $49.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
$71.99
Smooth, controlled braking is yours with Avid's HSX Rotor. It utilizes cross-drilled technology to dissipate heat and shed water, giving you a consistent feel at the lever and predictable speed control in all conditions. And, an aluminum carrier cuts down on the weight.
$24.99
- Melt forged aluminum construction - Coiled spring tension adjust
$1.50
• Designed to keep dust and dirt out of V-Brake cable/housing systems
$1.25
Hose fittings for Hayes hydraulic disc brakes
$2.25
Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar
$2.50
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
$3.15 - $42.00
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
$9.99
Miscellaneous replacement small parts for Hayes hydraulic disc brake systems. - Includes piston and seal
$18.99 - $27.99
- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip
$4.99
Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle. - Includes barrel adjuster
$10.99
This simple repair part is vital for getting bikes with side-pull caliper brakes safely back on the road. - 6mm size
$14.99
Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.
$20.00
Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.
$4.99
- Low profile - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Knurl-lock washer system
$8.99
Replacement inserts for Shimano cartridge v-brake pads - Black: standard compound designed for dry condition riding - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Green: designed for ceramic coated rims - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
$14.99
- Extra-long molded pads for MTB linear brakes - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
$18.25
Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel
$21.95
The Tectonic brake pad is a forged alloy holder that allows the rider to customize the exact positioning of the friction materials. The friction inserts are designed to interlock together and are secured into the holder on all sides. The Pad-Lock washer system has been improved by incorporating the convex pivot adjustment into the backing plate; thus allowing for the reduction in the number of washers needed to achieve all spacing requirements. The Tectonic pads come with a multi friction compound set up, but single or dual compounds can also be configured. Features: - Aluminum Holder - Integrated Pad-Lock Hardware - Secured End Cap - Interchangeable Compounds - Offset Post - Water Grooves - Available in Threaded and Cantilever (Non-Threaded) Specifications: - Weight per pair: 50.8 grams - Overall length: 73.3 mm - Pad contact width: 9.5 mm
$15.40 - $18.99
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame
$9.99
The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking. - Custom inner frame helps to stiffen the pad, reducing braking power loss from flex
$15.99
The short blade design of the Origin-8 Mini Trigger Brake Lever gives a clean, sleek look—with great stopping power—to your handlebars. • Designed for caliper & cantilever brakes • Cold forged double bent lever blade • 1-finger lever blade • 22.2mm (7/8") clamp • Short blade design • Left hand • 76g each
Page 1 of 2 Next page