Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$0.10
- High roundness grade 300 balls in a shop dispenser bottle - 1/8-inch, 500/bottle - 7/32-inch, 500/bottle
$0.94
- Replacement cable anchor bolt for brakes - Includes nut and washer
$1.00
- 8x1mm Allen head
$1.50
- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack
$1.50
• Designed to keep dust and dirt out of V-Brake cable/housing systems
$1.50
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.99 - $3.00
- Top lock nut for threaded headsets - Includes water seal - Bag of 10 Lock Nuts
$2.00
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$2.25
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
$2.50
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$2.50
This kit contains the hardware required to support a leather gasket in all SILCA floor pumps. Reusing the original nut can lead to later loosening of the assembly as the nylon insert will take a set over time. A new bolt kit guarantees years and years of trouble free service. Kit includes 5 parts: - Locking Nut, lower washer, and back nut are universal to all PISTA and SUPERPISTA Pumps - 28mm diameter or pumps prior to 2008 will use the thicker 24.6mm back washer - 30mm diameter or pumps after 2008 will use thinner 28mm back washer
$2.50
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
$2.95
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front
$3.00
The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.
$3.15 - $42.00
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
$3.50
The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA
$3.50
- Steel construction - Adapts BMX chainrings with 22mm hole to 19mm spindles - Bag of 10
$3.95
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
$3.99
- Large Flange-Fits Splined MX Cranks - Sold in pairs
$4.25
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$4.50
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$4.50
- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2
$4.50
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$4.50
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs
$4.95
- Chrome allen seat binder bolt
$4.99
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
$4.99 - $6.95
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
$4.99
- Cartridge Bearing - 1-3/8-inch Outer Diameter
$4.99
Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function
$5.50
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed
$5.95
- Grade 10 chromium steel balls
$5.99
The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.
$5.99 - $18.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
$6.50 - $14.99
- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains
$6.95
The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.
$6.99
- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use
$7.25
Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function
$7.99
Key features: - Adapter to fit Bontrager Race Lite Ergo Bar Ends to Bontrager Satellite Plus IsoZone Handlebars - Only compatible with the Bontrager Satellite Plus IsoZone Handlebar - For most other bar ends, use: Bontrager Satellite Plus IsoZone Bar End Adapter
$7.99
- Grade 10 chromium steel balls
$7.99
Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.
$8.00
The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.
$8.50
Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.
$8.75
Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function
$8.95
- Grade 10 chromium steel balls
$8.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$8.99 - $12.99
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Replacement M5 bolts for 4-Axis stems - Includes M5*P0.8*16L x 4pcs & M5*P0.8*18L x 2pcs - Bit Size: 4mm - Thread Pitch: M5 - Length: 4x 16mm, 2x 18mm
$9.99
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
$9.99 - $12.99
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
$9.99 - $11.99
Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.
$11.00
110-Series Alloy Interlok Headset Spacer - Aluminum construction
$11.99 - $13.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames. - Features threaded eyelets for rear rack mounting solutions on unique bike frames - Quick release (QR) versions include rubber lever grip
$11.99
QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool
$12.75
Corrosion resistant stainless steel washers. - Bottle of 100 - Stainless steel
$12.95
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
$13.39
Loose ball bearings in bags or bottles. - Replacement loose ball bearings
$13.60
Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function
Page 1 of 2 Next page